PRECISION MACHINED SOLUTIONS | (262) 743-1700

Precision Plus Welcomes Two Youth Apprentices and Two Gateway Youth CNC Boot Camp Students

Michael Reader

Youth Apprentices

Jordan Belanus, a senior at Elkhorn Area High School in Elkhorn, WI and Jake Sherwin, a senior at Big Foot High School in Walworth, WI, have joined Precision Plus’ Youth Apprentice Program.

Jordan Belanus began working as an Information Technology (IT) youth apprentice at Precision Plus (PPI) on November 9, 2015, reporting to Jeff Lemmermann, the company’s CIO and CFO. The IT apprenticeship adheres to the IT Skill Standards Checklist established by Wisconsin’s Department of Workforce Development.

Items on the checklist vary from soft skills such as communicating effectively and thinking critically, to job-specific skills such as upgrading an operating system or installing software. The checklist serves as a guideline to help the apprentice obtain designated competencies.

Jordan enjoys working on computers for friends and family, having developed an affinity for programming and networking. As an IT apprentice, he will also be putting those skills to work, performing back up operations, upgrading operating systems and installing software as needed. He will also assist to process employee IT help requests. As his internship progresses, Jordan should be able to perform certain tasks of his own volition, rather than being directed to do so.

In order to receive a certificate for his internship, Jordan must complete 450 total hours of work by August 2016. By state law, however, he cannot exceed 20 hours per week. He learned about PPI’s apprenticeship opportunity through his school’s career and technical education coordinator.

At Elkhorn Area High School, Jordan’s favorite subjects are algebra, physics and geometry. He plans to attend Gateway Technical College in the fall of 2016 and subsequently use its 2-plus-2 articulation agreements with the University of Wisconsin or with Milwaukee School of Engineering to continue his education in computer engineering.

In his spare time, Jordan enjoys playing video games, playing guitar, and practicing Tae Kwon Do, for which he holds a second-degree black belt.

Jake Sherwin began his manufacturing apprenticeship with PPI on November 2, 2015. He reports to Mark Beilman, Director of Education and Training.

The manufacturing apprenticeship follows the Skill Standards Checklist established by Wisconsin’s Department of Workforce Development for that purpose. The first part of the apprenticeship will include a general assessment of Jake’s math skills, micrometer and blueprint reading skills and geometric dimensioning and tolerancing (GD&T) interpretative skills.

After the first phase is completed, Jake will spend time with mentors from different departments to learn skills and applications from them first hand. Jake will be completing the core skills and machining unit of the Production Pathway of the Skill Standards Checklist.   Mentors will sign off on the acquired competencies at the end of their mentoring.

The curriculum at PPI goes hand in hand, with Jake’s curriculum at Big Foot High School. Jake learned about the apprenticeship opportunity at Precision Plus when Mark Beilman spoke to his technical education class in September. Jake knows that he wants to work in the trades—most likely in construction—after his graduation. However, he enjoys the science and agriculture classes he is taking, as well as helping with his family’s farm. In addition, he works part-time at Heyer True Value Hardware Store in Walworth, Wisconsin, so he is keeping his options open. His apprenticeship will also require him to complete 450 hours by August 2016.

When time permits, Jake enjoys hunting and fishing, baseball, and playing bass guitar in a band.

 

Youth CNC Boot Camp Students

Two Gateway students, currently enrolled in Gateway Technical College (GTC)’s Elkhorn Campus Youth CNC Boot Camp have begun their job shadowing experience at Precision Plus, as part of their current semester requirements.

Monday through Friday, Elliot Salentine from East Troy High School and Cameron Bunne from Elkhorn High School attend high school in the morning, followed by classes and training at GTC from 12:30 until 4:30 in the afternoon. As they learn different processes and applications at school, a concurrent shadowing program lends them the opportunity to watch professionals performing those jobs. Each student spends one hour per week at PPI to meet those requirements.

Thus far, the students have shadowed Marty Baumgardner in the Quality Assurance Lab, Ryan Landreman and Brad Pearson on the Miyano platform, and Curtis Hibl in the CAM Department. The shadowing will continue on the Tornos platform, the Secondary Department, the Scheduling Department and, finally, the Shipping Department.

Elliot and Cameron will continue their high school/boot camp schedule until the spring semester begins on February 2, 2016. At that time, they will attend their high school classes in the mornings, but will participate in a mentoring program at Precision Plus in the afternoon, learning and working in different departments. The mentoring phase will end in May 2016. The students will receive high school and boot camp credits for their experience at the company.

Although the Youth CNC Boot Camp mentoring program is similar to the Youth Apprenticeship program already in place, possible modifications may be made based on the students’ incoming skill level.

Cameron and Elliot are members of the first Youth CNC Boot Camp to graduate from GTC’s Elkhorn Campus in Walworth County. The program had already been running successfully at GTC’s other two locations in Racine and Kenosha.

For more information about Precision Plus’ apprenticeship and mentoring programs, please contact Mark Beilman via email or by calling 262-743-1700.

 

Precision Plus’ 2015-2016 Year Education Update

Michael Reader

By Mark Beilman
Director of Education and Training

The 2015-2016 academic year is well underway, and so are Precision Plus’ efforts to continue spreading the word among students, parents and teachers about career possibilities in manufacturing.

In addition to visiting schools, talking to technical education teachers, and participating in career and technical education (CTE) committees, Precision Plus (PPI) makes itself present at high school and college career fairs.

On September 9, 2015, PPI was present at the Panther Fest Career Fair at Wilmot Union High School, and plans to be at Beloit High School’s career fair on the 24th. On October 9th, the destination will be Milwaukee School of Engineering (MSOE), which will hold its career fair then.

On September 15, 2015, PPI attended Gateway Technical College Elkhorn Campus’s Open House, which showcased the new Community Center conference room, the Student Life Center, Walworth County Job Center, Walworth County Economic Development Alliance (WCEDA), the Veterinary Sciences building, and the Walworth County Educational Consortium’s Alternative High School.

Drawings of the anticipated new CNC Center were also on display. Precision Plus is fully vested in the success of this program. The first Youth CNC Boot Camp at the Elkhorn Campus began in July. One of the highlights of the program is the mentorship which each individual student receives from a designated industry professional.

A “Meet-and-Greet” luncheon for students and mentors was held at the college on September 18th, where mentors were announced and appointed. The luncheon was sponsored by WCEDA and the Walworth County Job Center. Precision Plus is excited to mentor two students during the 2015-2016 year: Elliot Salentine from East Troy High School and Cameron Bunne from Elkhorn High School. The students will not only receive ongoing mentoring, but will have an opportunity to work at PPI beginning in February of 2016, in accordance to their curriculum.

Precision Plus also encourages schools to bring classes to tour its facilities. On September 16, 2015, Career Advocate Lindsay Healless from Beloit Middle School brought her students to interview Mike Reader and Chris Clausen about careers in manufacturing. The students asked very good questions during the interview, but two of the students, Emily and MacKenzie, stumped Reader and Clausen when asked how they balanced work and their personal lives, and what were the most difficult portions of their jobs.

Two other schools are scheduled to tour the facility in October: the Walworth County Educational Consortium’s Alternative High School on the 8th, and Whitewater High School on the 15th.

The most anticipated event, however, is the celebration of Manufacturing Day (MFG DAY). Precision Plus is opening its doors for an open house on Thursday, October 8, 2015 from 5:00 p.m. until 7:30 p.m. Students, educators, parents, legislators and the public at large are invited to partake in an informal presentation by several PPI employees on what their roles are at the company, and take guided tours of the plant. To attend this event, please register HERE.

Precision Plus is committed to education and to bringing awareness of career opportunities in high-tech manufacturing. To schedule a tour of our facility and/or allow us to make a presentation to your group or organization, please contact Mark Beilman by email or by calling 262-743-1700.