PRECISION MACHINED SOLUTIONS | (262) 743-1700

How to Keep Students Awake in Class – Precision Plus in the News

Michael Reader

This is a reprint of an article authored by Susan Pohorski, which first appeared on Wisconsin Technical College System’s website.

How to keep students awake in class

By Susan Pohorski

It’s an age-old problem that has challenged teachers forever. How do you keep students awake and engaged in a classroom setting?

Several Elkhorn High School students took on this problem as the capstone project for their Engineering Design Development class. The students conducted research, designed prototype products and tested the products until they felt they had a viable answer.Their product is a pen that vibrates when the user has been inactive for a certain time period. Nod off and your pen will wake you.

A new way of teaching and learning
Hundreds of Wisconsin high schools and middle schools from Appleton to Winneconne are using an activity, project, and problem-based curriculum developed by Project Lead the Way (PLTW) to help students develop skills they need for success in post-secondary education and beyond.  As a result, students rarely fall a sleep during class.

Since 2009, Elkhorn Area School District (EASD) has implemented PLTW curriculum throughout all levels to teach science, technology, engineering and math (STEM). Courses cover biomedical science, computer science and engineering concepts. EASD is one of only two districts in the country where every student has access to PLTW curriculum.

“PLTW courses are very engaging and reach students with different learning styles,” commented Jason Tadlock, superintendent of the EASD. “Kids see the relevance of math and science in real life.”

Second grade students engineer a device for planting seeds. Fourth graders create vehicles and put them through crash testing. In fifth grade, the students learn to build and operate robots.

“We hear consistent feedback from employers who look for PLTW students because of their academic and teamwork skills,” Tadlock added.

Business partners with schools
The district also has a unique partnership with a major employer in the area. In 2012 Precision Plus invited 24 area educators to tour their facilities to discuss the career possibilities available for high school graduates. The school district also hosts an annual Manufacturing Career Panel discussion for students sponsored by Precision Plus Representatives of Elkhorn area employers discuss the state of industry and the possibilities manufacturing offers. This year Mike Reader, president of Precision Plus, moderated the discussion.

Students who toured local manufacturing facilities asked if they could have internships with the companies.

“We had 10 student interns the first year,” said Barry Butters, director of education and training for Precision Plus, who was hired to coordinate and grow the program. He teaches some of the PLTW engineering courses, including the one mentioned above.

“Mike Reader is a true visionary,” Butters explained. “He saw the need to develop a talent pipeline and engage the schools.”

With the partnership of Precision Plus and a grant from the Kern Foundation, teachers from the Elkhorn Area School District attended PLTW training.

Work skills, life skills
“Project Lead the Way makes better thinkers and problem solvers,” Butters adds. “When young students understand they can make things and solve problems, they will go far in life.”Chris Trottier, principal of Elkhorn High School enthusiastically supports the new style of learning for his students.“Kids develop skills to enter the workforce,” he said. “Like problem solving and critical thinking.”Tadlock points out that students in these classes learn to take risks and learn from their mistakes. “Kids come out ahead when they can overcome trials. That skill carries over into the world of work,” he continued.Does your school use project-, activity- and problem-based curriculum? Employers want job candidates who are thinkers and problem solvers.“Challenge businesses to get involved,” Butters urged parents. “Schools cannot do it alone with the fiscal constraints they are under.”

Read the original article HERE.

Precision Plus’ Barry Butters Asked to Be a Judge at the Wisconsin Project Lead The Way 2014 EDD Competition

Michael Reader

Barry Butters, Director of Training and Education at Precision Plus was asked to participate as a judge in the Wisconsin Project Lead The Way 2014 Engineering Design and Development (EDD) Competition. There were a total of 24 judges assessing the projects of 19 teams.

Being that Butters is a certified EDD instructor, he knew the process well. Each judge was assigned five teams to listen to and observe, and score based on predetermined scoring rubric, after which an average score was compiled. The caliber of the teams was outstanding. “I was truly impressed with the quality of the students’ work,” said Butters, “It seemed as though some of the groups were already degreed engineers.”

The winning entry was from Oconomowoc, and Butters had the privilege to judge that team. The results of your work are as follows:  The entry, “Active Radiation Shielding for Manned Interplanetary Space Flight” received the average high score.  This team will receive a $5,000 cash award.

Project Lead The Way (PLTW) supports young men and women by making available Engineering and Biomedical Sciences classes that lead to exciting new careers.  For more information about Wisconsin Project Lead The Way EDD Competition, click here.

Butters looks forward to being a judge at the 2015 EDD Competition.

Precision Plus Intern Matt Dowell Places 5th at SkillsUSA Nationals

Michael Reader

Precision Plus intern Matt Dowell and his team placed 5th out of 22 teams at the National SkillsUSA Competition in Kansas City, MO.

Matt and his teammates Mikaela Coose and Cecily Fico earned the a trip to the national competition by taking 1st place in Wisconsin’s SkillsUSA Engineering Technology/Design Competition in Madison on April 29-30, from six teams competing in this category. Precision Plus congratulates Matt and his teammates!

Their product, called ecoTUBE,  is an innovative medical tube designed to dispense 100% of any salve or ointment.

The national competition spanned from Monday, June 23 through Saturday, June 28, 2014. In the Engineering Technology/Design category, teams of three students demonstrated their ability to design an innovative an engineering project and present those ideas along with a display and live model. During the presentation, students were judged on their performance as a professional team, presentation of their project to a panel of judges from the engineering field, their storyboard presentation model, and the overall effect of the presentation.

Matt and his teammates developed their project while taking the Project Lead The Way (PLTW) capstone course Engineering Design and Development (EDD) at Wilmot Union H.S. Their advisor for the SkillsUSA competition was George Troupis.

HISTORY OF THE PROJECT

Problem Origination: Team member Mikaela Coose’s dog suffers from dry-eye syndrome, which requires regular application of an ointment medication. The ointment comes in a tube, most similar to that of a toothpaste tube, but smaller in size. Because this medication is costly and a substantial amount remains in the tube after it is squeezed out, the team decided they would redesign the current not user-friendly squeezable tube design for these types of applications.

PROJECT DETAILS

Design Statement: Patients find it increasingly difficult to utilize the full value of expensive salve medicine due to the current structure of medical tubes.

Design Objective: Design and develop an innovative medical tube that allows patients to more adequately utilize the full value of costly salve medicine.

Target Market:

  • Elderly or Individuals with Arthritis – due to the limited force needed to squeeze the medication out compared to other containers
  • Handicapped or Disabled Individuals With Limited Motor Skills
  • Anyone Looking to Save Money – The product’s low waste results in cost savings

 Description of Product Overview (As Shown On The Video Above):
The design was rendered in Autodesk Inventor, and 3-D modeled using the same software.

  • The first segment shows ecoTUBE’s assembly sequence
    • The spring moves left into the far left component
    • The assembly moves from left to right, snapping the left most pieces together
    • The plunger gets screwed on
    • An O-ring is added to seal the assembly
    • The product is placed in the tube
    • The sub assembly from before gets snapped into the tube
    • The cap gets placed on it.
  • The second segment shows an working model of ecoTUBE
  • The third segment demonstrates the child lock on the bottom of it. Initially it just spins, but once pushed in, it twists the entire unit

Note: There is also a model that does not include the child lock, and is geared for over-the-counter products such as sunscreen, toothpaste, etc. The team included a child lock on the original design presented, as their target market was medical-type applications.

Personal Project Roles Of The Team Members:

Matthew Dowell – Headed up the CAD modeling and prototype building

Mikaela Coose – Presentation materials such as the PowerPoint and Storyboard

Cecily Fico – Much of the documentation such as the design brief and made the label

ABOUT THE TEAM:

This was not Wilmot’s first trip to Kansas City, as Mikaela Coose (past Senior) and Matt Dowell (past Junior), made their second trip along with new member Cecily Fico (past Sophomore) to the 50th SkillsUSA National Leadership and Skills Conference. Having placed 14th in last year’s competition in the Engineering Technology/Design category, Coose and Dowell learned what it would really take to bring their presentation to the next level.

With Fico on board, the Wilmot team devoted most of their free time throughout the school year to work on their ecoTUBE – coined for its economical and ecofriendly qualities – an innovative medical tube designed to dispense 100% of any salve, such as medicine gels, toothpaste or sunscreen lotion.

During the week of June 22 -27, 2014, Coose, Dowell, and Fico had the opportunity to demonstrate and explain their creative idea to each of the judges in personal interviews as well as to the public. They also took on a spontaneous team problem-solving problem, involving building a roller coaster for a marble out of provided materials. The team ended the competition week with a professional presentation of their product. Wilmot came very close to medaling at the Awards Night, but were completely thrilled to find out the team notably placed 5th in the Nation.

Although Coose will be moving on to study engineering at Olivet Nazarene University, Dowell and Fico have a promising future as they look forward to using the priceless experience they have gained to improve and eventually compete at the next SkillsUSA Conference in 2015. Dowell is looking to a future of becoming a mechanical engineer, and Fico desires to be a civil or architectural engineer.

Precision Plus’ Barry Butters Is Certified to Teach Project Lead The Way’s Engineering Design and Development Capstone Course to High School Students

Michael Reader

Barry Butters, Director of Education and Training at Precision Plus spent two full weeks at Milwaukee School of Engineering (MSOE) in June to complete intensive training to enable him to teach the course ‘Engineering Design and Development’ (EDD) to high school students. The course is a capstone course of the Project Lead The Way (PLTW) curriculum.

As per the description of the capstone course on PLTW’s website, “Engineering Design and Development (EDD) gives students the opportunity to work in teams to solve problems of their own choosing.  Under the guidance of a community mentor, teams employ all the skills and knowledge gained through previous coursework to brainstorm, research, construct and test  a model in real-life situations (or simulations); document their designs; and present and defend the designs to a panel of experts.”

Butters participation was sponsored by the Elkhorn Area School District. Beginning in fall 2014, he will be teaching Elkhorn Area H.S. students as well, as other students from local school districts, the EDD Course at Precision Plus’ classroom.

The instructors’ training at Milwaukee School of Engineering teamed up the participants to go through a simulation of the EDD program, which they will be teaching during the school year. Butters collaborated with Phil Winegar, Technology and Engineering Instructor at Menomonie High School, and Brent Siler, Technology and Engineering Instructor at Middleton High School.

The mission for the teams in the training course was to come up with a problem, a solution, develop three design models to implement the solution, and, after choosing one, present their project to a panel of engineers.

Butter’s team pursued a solution for preventing young children from chocking on food. The team focused on the development of a consumer device that would check the softness of food. It was not so much about having a working solution to the problem in two weeks, but rather about understanding how to approach the entire engineering process to come up with a solution.

After a great deal of brainstorming and a decision matrix, three possible prototype solutions–a spring-loaded plunger, a collapsible knife, and an elastic cutter–were printed on a MakerBot 3D printer.

Next, the team selected one potential solution and the solution was tested through experimentation. In the image to the left, butters tests the selected model for its ability to detect the softness of food consistency.

Finally, the results of their entire project and engineering  process were presented to a panel of engineers for scrutiny and recommendations. Pictured on the image to the right are Butters and his teammates Phil Winegar and Brent Siler.

Upon completion of the course, Butters and all the other participants received certificates from PLTW Master Teachers Sharon Tomski and Denise Kimblern, PLTW Affiliate Director Steve Salter, and MSOE V.P. of Academics, Dr. Frederick Berry.

All the training course graduates were looking forward to teaching this program in the fall.